Choosing the right pit bike handlebars improves control, comfort, and safety during off-road riding. Most dirt bikes use 7/8 inch clamps, so 22 mm bars are the standard. Durable, lightweight aluminum bars—especially 6061-T6 with heat-treated finishes—offer strength without excess weight. Crossbar pads protect the rider in a crash, while mid-rise designs support a standing position through rough terrain. This guide highlights five top handlebars that fit popular dirt bike models and ATVs, emphasizing compatibility, build quality, and value. Read on for key factors to consider before choosing a new bar and how the five picks compare.
Summary of chosen products
| Product | Brand | Clamp Size / Material | Notes |
|---|---|---|---|
| RUTU 7/8 Inch Dirt Bike Handlebars With Foam Pad | RUTU | 7/8″ (22 mm), 6061-T6 Aluminum | Crossbar pad, mid-rise, wide compatibility |
| JRL 7/8″ Mid Handlebars | JRL | 7/8″ (22 mm), Aluminum Alloy | Heat-treated, durable bends, matte finish |
| DJ-Motor 7/8″ Tall Handlebar | DJ-Motor | 7/8″ (22 mm), Aluminum 6061 | Tall rise, bar pad included (black & yellow/green) |
| WEIYINGSI 7/8″ Foam Pad Bar Blue | WEIYINGSI | 7/8″ (22 mm), 6061-T6 Aluminum | Foam pad, HRC16 heat treatment, easy to cut to length |
| JXPANG Universal 28mm 1 1/8″ Handle Bar | JXPANG | 7/8″ & 1 1/8″ (28 mm & 22 mm tolerance) | 6063-T6 aluminum, skull design, thick wall |
RUTU 7/8 Inch Dirt Bike Handlebars With Foam Pad
These handlebars are designed for off-road motorcycles with 7/8″ clamps. The bar uses 6061-T6 aluminum and comes with upgraded crossbar pads to reinforce the bar and protect the rider. The listed dimensions include a total width of 30.12 inches, a height of 6.14 inches, a sweep of 2.05 inches, and a base width of 7.48 inches, which place the bar in a mid-rise, wide-profiling category ideal for standing control. Compatibility spans major pit and dirt bike models such as CRF, YZF, KXF, KLX, RMZ, and DRZ, and it can also fit ATVs and quads. Before purchasing, verify your bike’s frame compatibility and clamp dimensions.
- 7/8″ (22 mm) diameter
- 6061-T6 aluminum with reinforced crossbar pad
- Wide model compatibility (CRF, YZF, KXF, KLX, RMZ, DRZ)
JRL 7/8″ Mid Handlebars
The JRL 7/8″ Mid Handlebars prioritize compatibility and durability for pit and dirt bikes. They fit major models such as CRF, YZF, KXF, KLX, RMZ, and DRZ, and also accommodate ATVs and quad bikes. The bars are crafted from heat-treated aluminum alloy, delivering a balance of lightness and rugged resilience to resist bending and impact. The anodized matte finish adds corrosion resistance and a premium look. The bends are smooth and crimp-free, reducing stress concentrations and potentially enhancing longevity. Riders seeking a practical, robust upgrade with a clean aesthetic will find these a solid choice.
- Universal 7/8″ clamp compatibility
- Heat-treated aluminum for durability
- Anodized matte finish; smooth bends
RUTU 7/8" Dirt Bike Handlebars With Foam Pad Black
This RUTU model features a crossbar pad and a 6061-T6 aluminum build, emphasizing rider protection and rigidity. The bar remains a 7/8″ sizing option, widely compatible with pit and dirt bikes. It’s designed with a mid-rise profile to improve control while standing, and the foam pad adds impact absorption. Compatibility spans CRF, YZF, KXF, KLX, RMZ, and DRZ models, with ATVs and quad bikes also within reach. As with similar RUTU bars, dimension confirmation is recommended before purchase to ensure a perfect fit for your machine.
- Crossbar pad for rider protection
- 6061-T6 aluminum, mid-rise design
- Broad compatibility across major dirt bike lines
DJ-Motor 7/8″ Tall Handlebar
The DJ-Motor tall handlebar provides a higher-rise option ideal for riders who stand frequently to absorb rough terrain. It matches 7/8″ (22 mm) clamps and is constructed from 6061 aluminum, a standard for strength without excessive weight. The product is offered in color combinations like Black & Yellow or Black & Green, adding a visual appeal while maintaining durability. It is designed for Honda CRF110 EFI models from 2019–2025, but the bar’s generic 7/8″ sizing makes it adaptable to many dirt bikes with compatible clamps. A bar pad is included in some color variants to enhance rider protection.
- Tall rise for standing comfort
- 6061 aluminum; color options
- Fitment example: Honda CRF110 EFI 2019–2025
WEIYINGSI 7/8 Inch Foam Pad Bar Blue
The WEIYINGSI blue bar emphasizes compatibility and durability. It is designed for 7/8″ dirt bikes, compatible with CRF, YZF, KXF, KLX, RMZ, and DRZ models, and can also fit ATVs and quad bikes. The bar uses high-strength 6061-T6 aluminum with an HRC16 heat treatment, increasing resistance to bending and damage from falls. A notable feature is the dimensional markings that let riders customize length, enabling a precise fit for varying bike geometries. A blue foam pad adds protection while maintaining a clean, coordinated look.
- 6061-T6 aluminum with HRC16 treatment
- Dimensional markings for easy shortening
- Foam pad included; color option: blue
WEIYINGSI 7/8 Inch With Green Bar And Pad
This WEIYINGSI model follows the same core design as the blue version, offering a 7/8″ bar with a foam pad. It is built from durable 6061-T6 aluminum and is suitable for major dirt bike brands like CRF, YZF, KXF, KLX, RMZ, and DRZ, with the option to fit ATVs and quad bikes. The height and width align with mid-rise expectations for standing control, and the finish adds a vibrant green accent for riders seeking a bold look. The product emphasizes easy installation and compatibility with common dirt-bike configurations.
- Mid-rise, 7/8″ diameter
- 6061-T6 aluminum; emergency-fit for many models
- Durable finish with color accents
JXPANG Universal 28mm 1 1/8″ Handle Bar
The JXPANG handlebar stands out for its dual-size compatibility, supporting both 7/8″ and 1 1/8″ handlebars. It is crafted from 6063 aluminum with T6 treatment to resist bending and warping. The 28 mm (1 1/8″) diameter option is ideal for riders seeking extra stiffness, while the included skull pattern adds a distinctive aesthetic. The bar walls are thicker (up to 5 mm in some designs) to enhance durability under rough riding conditions. This option is versatile for a range of motorcycles, ATVs, dirt bikes, and even some street and folding bikes that use compatible clamp sizes.
- Compatible with 7/8″ and 1 1/8″ bars
- 6063 aluminum; T6 treated
- Distinctive skull design; thicker wall for rigidity
Buying Guide
Size, Fit, And Compatibility
Bar diameter is the most critical compatibility factor. Most pit bikes use 7/8″ clamps, but some models support 1 1/8″ bars. Always confirm your bike’s clamp size before purchasing. If your bike allows multiple bar sizes, consider a mid-rise bar that balances control when standing with comfortable reach while seated. Some models advertise dual sizing (7/8″ and 1 1/8″), which broadens compatibility but may require careful attention to clamp compatibility and internal cable routing.
Material, Construction, And Finish
The standard for strength-to-weight in dirt-bike handlebars is 6061-T6 aluminum, often with additional heat treatment (like HRC16) to increase resistance to bending after impact. Aluminum alloys provide a good mix of stiffness and lightness, while anodized or powder-coated finishes resist corrosion and wear. When choosing a bar, look for reinforced crossbar pads for rider protection and a smooth bend profile to reduce stress points that can lead to fatigue over time.
Width, Rise, And Sweep
Handlebars come in various profiles. A total width around 30 inches with a mid-rise (roughly 6 inches) is common for pit bikes and dirt bikes, offering a stable standing position without overly restricting turning. The sweep (the backward bend) around 2 inches is typical, helping align wrists and shoulders naturally during riding. If you ride aggressively or stand often, a slightly taller bar with a wider width can improve control, but check clearances with your fuel tank and shrouds to avoid interference.
Crossbar Pads, Protection, And Aesthetics
Crossbar pads protect the rider if the bar is struck during a fall. Pads also offer a visual contrast and can complement bike color schemes. Some handlebars include foam pads, which can be replaced or upgraded. Aesthetics matter for some riders, but protection and durability should be the priority in the selection process.
Length Customization And Installability
Some bars provide dimensional markings that make it easier to cut the bar to your preferred length for a custom fit. Easy installation features, such as compatible clamp sizes and straightforward mounting points, reduce downtime and potential installation errors. If you’re unsure about the exact fit, consult the seller’s compatibility notes or compare your current bar’s length and rise with the new option.
In summary, the best option depends on your riding style, bike model, and preferred riding position. For riders who want a robust, mid-rise option with broad model compatibility, the 7/8″ bars with reinforced crossbar pads are typically the safest, most versatile choice. Riders seeking a taller rise or unique aesthetic can opt for tall bars or color-finished models, while those preferring a dual-size design gain flexibility across multiple bike configurations. Always verify clamp size, model compatibility, and physical clearances before purchasing.